Are you located in the United States?

Would you prefer to navigate to our United States website?

Yes, take me there!
No, stay on this site.

Shur-Lock II

Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16" nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1" - 3" sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16" nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1" - 3" sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.

Features

  • One person installation
  • Re-enterable, no special tools required
  • Air-tight and water-tight
  • No ID reduction
  • Excellent pull-out strength on HDPE, PVC, FRP, and steel
  • UV resistant
  • No-Stop version available for confined areas or repairs
  • ETL Listed to CSA STD C22.2 18.3-04
  • Listed to UL STD 514B
Ask your question
Shur-Lock II

Technical Specifications

Select Coupler Type

Classic
Classic
No-Stop
Description Nominal OD (in.) ETL Listed Height (in) Pull Out Strength (lb) Packaging Amount of Items/Case
1.00" Shur-Lock II 1.315 ✔ 5.7 600 Case 10
1.25" Shur-Lock II 1.66 ✔ 5.7 700 Case 10
1.25" HYB Shur-Lock II 1.59 5.7 700 Case 10
1.50" Shur-Lock II 1.9 ✔ 5.7 700 Case 10
2.00" Shur-Lock II 2.375 ✔ 5.7 700 Case 10
2.00" EXT Shur-Lock II 2.375 8.25 700 Case 10
2.50" Shur-Lock II 2.875 ✔ 9.25 1000 Case 6
3.00" Shur-Lock II 3.5 ✔ 10.75 1000 Case 6
4.00" Shur-Lock II 4.5 ✔ 12 1000 Case 4
5.00" Shur-Lock II 5.563 ✔ 14.25 1000 Case 2
6.00" Shur-Lock II 6.625 ✔ 14.25 1000 Case 2
1.00" NS Shur-Lock II 1.315 ✔ 5.7 600 Case 10
1.25" NS Shur-Lock II 1.66 ✔ 5.7 700 Case 10
1.50" NS Shur-Lock II 1.9 ✔ 5.7 700 Case 10
2.00" NS Shur-Lock II 2.375 ✔ 5.7 700 Case 10
2.50" NS Shur-Lock II 2.875 ✔ 9.25 1000 Case 6
3.00" NS Shur-Lock II 3.5 ✔ 10.75 1000 Case 6
4.00" NS Shur-Lock II 4.5 ✔ 12 1000 Case 4
5.00" NS Shur-Lock II 5.563 ✔ 14.25 1000 Case 2
6.00" NS Shur-Lock II 6.625 ✔ 14.25 1000 Case 2

Downloads

Specifications
DL_ShurLock Coupler_11.23
Other documents
Shur-Lock II Installation Guide
No-Stop Shur-Lock ll Installation Guide

Other couplers

Split-Lock +

The Split-Lock + is a split coupler produced from a glass fiber reinforced nylon resin. The coupler is heat and UV stabilized, and offers excellent impact strength. It’s reusable and is ideal for temporarily coupling conduits, particularly at slack-loop locations, and also for air-assisted jetting applications. The coupler is easily assembled using a 7/16” nut driver.

Aluminum Threaded

Reverse-threaded aluminum coupler. Tapered threads accommodate a wide range of conduit OD's within a given conduit size. Also available in a Riser/Plenum rated version.
A low-cost push-on coupler with a molded rubber gripping insert. Can be used on HDPE, PVC, Fiberglass (FRE), and metal conduit. Transition couplers are used to join ducts with different outside diameters.

E-LOC

A low-cost push-on coupler with a molded rubber gripping insert. Can be used on HDPE, PVC, Fiberglass (FRE), and metal conduit. Transition couplers are used to join ducts with different outside diameters.
A simple coupler to install and ideal where higher pull-out strengths are needed. The molded rubber gripping insert creates a water-tight and air-tight seal, while the additional screws aid to increase the pull-out strength.

E-LOC Plus

A simple coupler to install and ideal where higher pull-out strengths are needed. The molded rubber gripping insert creates a water-tight and air-tight seal, while the additional screws aid to increase the pull-out strength.
The Double E-LOC versions are suitable for cable blowing applications and are UV resistant for aerial use.

Double E-LOC

The Double E-LOC versions are suitable for cable blowing applications and are UV resistant for aerial use.
The Mor Clamp coupling is quickly and easily installed by slipping onto or wrapping around a conduit joint. The thick neoprene gasket assures a positive butt joint seal. It accommodates a variety of conduit types including HDPE, cast iron, PVC, and fiberglass. The stainless steel design offers a lightweight and economical unit which is strong and durable. Zinc plated carbon steel bolts are included for tightening the Mor Clamp coupling.

Mor Clamp

The Mor Clamp coupling is quickly and easily installed by slipping onto or wrapping around a conduit joint. The thick neoprene gasket assures a positive butt joint seal. It accommodates a variety of conduit types including HDPE, cast iron, PVC, and fiberglass. The stainless steel design offers a lightweight and economical unit which is strong and durable. Zinc plated carbon steel bolts are included for tightening the Mor Clamp coupling.
Used to join and seal length of HDPE and PVC Duct. The internal double compression seal is created as the end caps are tightened. NOTE: PVC compression couplers are not recommended for high-pressure air or gas lines, or applications requiring high pull-out resistance.

Compression Coupler

Used to join and seal length of HDPE and PVC Duct. The internal double compression seal is created as the end caps are tightened. NOTE: PVC compression couplers are not recommended for high-pressure air or gas lines, or applications requiring high pull-out resistance.
Quick, field assembly couplers or adapters to join different material types

Smooth-Cor Flex Kit

Quick, field assembly couplers or adapters to join different material types
Used with Armor Guard Conduit, the Armor Guard Kit is comprised of a Split-Lock + Coupler, a ScotchLok shield connector, and bonding braid for bonding and grounding the armored layer in the duct. This coupler arrangement is suitable for cable blowing applications.

Armor Guard Kit

Used with Armor Guard Conduit, the Armor Guard Kit is comprised of a Split-Lock + Coupler, a ScotchLok shield connector, and bonding braid for bonding and grounding the armored layer in the duct. This coupler arrangement is suitable for cable blowing applications.
Want a better connection with Dura-Line?

Ask a question or email us a comment! We're happy to supply additional information and would love to explore how we can be of service to you.

Contact us

Want a better connection with Dura-Line?

Ask a question or email us a comment! We're happy to supply additional information and would love to explore how we can be of service to you.

Contact us