Are you located in the United States?

Would you prefer to navigate to our United States website?

Yes, take me there!
No, stay on this site.

E-LOC

A low-cost push-on coupler with a molded rubber gripping insert. Can be used on HDPE, PVC, Fiberglass (FRE), and metal conduit. Transition couplers are used to join ducts with different outside diameters.
A low-cost push-on coupler with a molded rubber gripping insert. Can be used on HDPE, PVC, Fiberglass (FRE), and metal conduit. Transition couplers are used to join ducts with different outside diameters.

Features

  • Fast push-on installation
  • Inexpensive, one person installation
  • Low pull-out strength
  • Not recommended for blowing or plow chute applications
Ask your question
E-LOC

On this page

Other accessories

Technical Specifications

Select Coupler Type

Classic
Classic
Corrugated
Transition
Description Nominal OD (in.) OD Working Range (in) Height (in) Packaging
0.50" SDR E-LOC Coupler 0.84 0.836 - 0.844 6 Each
0.75" SDR E-LOC Coupler 1.05 1.045 - 1.055 6 Each
1.00" SDR E-LOC Coupler 1.315 1.308 - 1.322 6 Each
1.25" SDR E-LOC Coupler 1.66 1.652 - 1.668 6 Each
1.50" SDR E-LOC Coupler 1.9 1.890 - 1.910 6 Each
2.00" SDR E-LOC 12" Length 2.375 2.363 - 2.387 12 Each
2.00" SDR E-LOC Coupler 2.375 2.363 - 2.387 6 Each
2.50" SDR E-LOC Coupler 2.875 2.861 - 2.889 6 Each
3.00" SDR E-LOC Coupler 3.5 3.482 - 3.518 6 Each
4.00" SDR E-LOC 6" Length 4.5 4.477 - 4.523 6 Each
4.00" SDR E-LOC 8" Length 4.5 4.477 - 4.523 8 Each
4.00" SDR E-LOC 12" Length 4.5 4.477 - 4.523 12 Each
5.00" SDR E-LOC 12" Length 5.563 5.535 - 5.591 12 Each
5.00" SDR E-LOC Coupler 5.563 5.535 - 5.591 6 Each
6.00" SDR E-LOC 6" Length 6.625 6.592 - 6.658 6 Each
6.00" SDR E-LOC 8" Length 6.625 6.592 - 6.658 8 Each
6.00" SDR E-LOC 12" Length 6.625 6.592 - 6.658 12 Each
8.00" SDR E-LOC Coupler 8.625 8.582 - 8.668 8 Each
1.00" E-LOC Corrugated Coupler 1.35 1.350 6 Each
1.25" E-LOC Corrugated Coupler 1.575 1.575 6 Each
1.50" E-LOC Corrugated Coupler 1.83 1.830 6 Each
2.00" E-LOC Corrugated Coupler 2.35 2.350 6 Each
1.00" - 1.25" SDR Transition E-LOC Coupler - 1.315 - 1.660 6 Each
1.25" - 2.00" SDR Transition E-LOC Coupler - 1.660 - 2.375 6 Each
1.25" - 1.50" SDR Transition E-LOC Coupler - 1.660 - 1.900 6 Each
1.50" - 2.00" SDR Transition E-LOC Coupler - 1.900 - 2.375 6 Each
2.00" - 3.00" SDR Transition E-LOC Coupler - 2.375 - 3.500 6 Each
3.00" - 4.00" SDR Transition E-LOC Coupler - 3.500 - 4.500 6 Each

Other couplers

Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16" nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1" - 3" sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.

Shur-Lock II

Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16" nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1" - 3" sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.

Split-Lock +

The Split-Lock + is a split coupler produced from a glass fiber reinforced nylon resin. The coupler is heat and UV stabilized, and offers excellent impact strength. It’s reusable and is ideal for temporarily coupling conduits, particularly at slack-loop locations, and also for air-assisted jetting applications. The coupler is easily assembled using a 7/16” nut driver.

Aluminum Threaded

Reverse-threaded aluminum coupler. Tapered threads accommodate a wide range of conduit OD's within a given conduit size. Also available in a Riser/Plenum rated version.
A simple coupler to install and ideal where higher pull-out strengths are needed. The molded rubber gripping insert creates a water-tight and air-tight seal, while the additional screws aid to increase the pull-out strength.

E-LOC Plus

A simple coupler to install and ideal where higher pull-out strengths are needed. The molded rubber gripping insert creates a water-tight and air-tight seal, while the additional screws aid to increase the pull-out strength.
The Double E-LOC versions are suitable for cable blowing applications and are UV resistant for aerial use.

Double E-LOC

The Double E-LOC versions are suitable for cable blowing applications and are UV resistant for aerial use.
The Mor Clamp coupling is quickly and easily installed by slipping onto or wrapping around a conduit joint. The thick neoprene gasket assures a positive butt joint seal. It accommodates a variety of conduit types including HDPE, cast iron, PVC, and fiberglass. The stainless steel design offers a lightweight and economical unit which is strong and durable. Zinc plated carbon steel bolts are included for tightening the Mor Clamp coupling.

Mor Clamp

The Mor Clamp coupling is quickly and easily installed by slipping onto or wrapping around a conduit joint. The thick neoprene gasket assures a positive butt joint seal. It accommodates a variety of conduit types including HDPE, cast iron, PVC, and fiberglass. The stainless steel design offers a lightweight and economical unit which is strong and durable. Zinc plated carbon steel bolts are included for tightening the Mor Clamp coupling.
Used to join and seal length of HDPE and PVC Duct. The internal double compression seal is created as the end caps are tightened. NOTE: PVC compression couplers are not recommended for high-pressure air or gas lines, or applications requiring high pull-out resistance.

Compression Coupler

Used to join and seal length of HDPE and PVC Duct. The internal double compression seal is created as the end caps are tightened. NOTE: PVC compression couplers are not recommended for high-pressure air or gas lines, or applications requiring high pull-out resistance.
Quick, field assembly couplers or adapters to join different material types

Smooth-Cor Flex Kit

Quick, field assembly couplers or adapters to join different material types
Used with Armor Guard Conduit, the Armor Guard Kit is comprised of a Split-Lock + Coupler, a ScotchLok shield connector, and bonding braid for bonding and grounding the armored layer in the duct. This coupler arrangement is suitable for cable blowing applications.

Armor Guard Kit

Used with Armor Guard Conduit, the Armor Guard Kit is comprised of a Split-Lock + Coupler, a ScotchLok shield connector, and bonding braid for bonding and grounding the armored layer in the duct. This coupler arrangement is suitable for cable blowing applications.
Want a better connection with Dura-Line?

Ask a question or email us a comment! We're happy to supply additional information and would love to explore how we can be of service to you.

Contact us

Want a better connection with Dura-Line?

Ask a question or email us a comment! We're happy to supply additional information and would love to explore how we can be of service to you.

Contact us